BNDQH - PB75, LEAD II OXIDE

  • MSDS: BNDQH
  • Manufacturer: SPEX INDUSTRIES INC
  • Product Name: PB75, LEAD II OXIDE
  • National Stock Number: 6810-00N030134
Product Identification

Product ID:PB75, LEAD II OXIDE
MSDS Date:11/08/1989
FSC:6810
NIIN:00N030134
MSDS Number: BNDQH

Responsible Party
SPEX INDUSTRIES INC
3880 PARK AVE
EDISON, NJ 08820
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 908-549-7144

Preparer: VANAJA SIUAKUMAR

Cage: 07977

Contractor
SPEX CERTIPREP INC
METUCHEN, NJ 08840 US

Telephone: 732-549-7144

Cage: 07977

Ingredients

LEAD MONOXIDE; (LEAD OXIDE)

CAS: 1317-36-8

RTECS: OG1750000

Fraction By Weight: 100%

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.15 MG/M3 (PB)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LEAD CAN AFFECT REPRODUCTIVE
CAPABILITIES INCLUDING CHROMOSOMAL DAMAGE AND EFFECT ON FETUSES.
LEAD CAN AFFECT KIDNEYS, BLOOD AND NERVOUS SYSTEM. EARLY SIGNS OF
ACUTE INTOXICATION ARE FATIGUE, DISTURBA NCE OF SLEEP AND
CONSTIPATION WITH MORESEVERE EXPOSURES FOLLOWED BY COLIC, ANEMIA
AND NEURITIS.
Explanation of Carcinogenicity:LEAD:IARC GROUP 2B
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IF IRRITATION CONTINUES GET MD ATTENTION IMMEDIATELY.
EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES OCCASIONALLY LIFTING
UPPER AND LOWER LIDS. SKIN:REMOVE CONTAMINATED CLOTHING, THEN FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. WASH CLOTHING THOROUGHLY
BEFORE REUSE. INHAL:MOVE TO FRESH AIR. INGEST:CALL MD IMMEDIATELY .

Fire Fighting

Flash Point:NOT COMBUSTIBLE
Extinguishing Media:APPROPRIATE TO SURRONDING FIRE CONDITIONS.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP . CAN
PRODUCE TOX LEAD FUMES AT ELEVATED TEMP. KEEP AWAY FROM OXIDIZING
MATLS AT ELEVATED TEMPS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:EVACUATE AND VENTILATE AREA. SWEEP UP AND
PLACE IN BAG, HOLD FOR PROPER DISPOSAL. WEAR PROTECTIVE CLOTHING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. KEEP
TIGHTLY SEALED WHEN NOT IN USE.
Other Precautions:AVOID INHALATION, INGESTION, CONTACT WITH EYES AND
SKIN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:CHEMICAL FUME HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:HAVE IMMEDIATE AVAILABILITY OF EYE WASH IN
CASE OF EMERGENCY.
Work Hygienic Practices:WASH CAREFULLY AFTER USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:T6
Melt/Freeze Pt:M.P/F.P Text:1627F,886C
Spec Gravity:9.53
Solubility in Water:COLD:0.0017 G/100 ML
Appearance and Odor:YELLOW POWDER

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CAN PRODUCE TOXIC FUMES AT ELEVATED
TEMPERATURES.

Disposal

Waste Disposal Methods:CONTACT LOCAL HAZARDOUS OR CHEMICAL WASTE
DISPOSAL AGENCY FOR REGULATIONS. DISPOSAL MUST BE IN ACCORDANCE
WITH LOCAL, STATE AND FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.